Terminal blocks, protectors, distribution blocks

Terminal block, Linergy TR, push-in type, feed through, 4 points, 2.5mm², grey, set of 50

Terminal block, Linergy TR, push-in type, feed through, 2 points, 2.5mm², orange, set of 50

Terminal block, Linergy TR, screw type, knife disconnect, 2 points, 4mm², grey

Terminal block, spring type, basic disconnect terminal, 2 points, 4mm², grey

Linergy TR is terminal block for Linergy. It belongs to linergy passthrough terminal block with 4 mm² nominal cross section. The rated operational voltage is 150V conforming to cURus, 500V conforming to EN/IEC 60947-7-1 and 352V conforming to ATEX Exe II...

SCREW TERMINAL, FEED THROUGH, 3 POINTS, 4MM² , BLUE

Terminal block, Linergy TR, blue, 6mm2, passthrough, 2 points, set of 10

Terminal block, Linergy TR, blue, 10mm2, passthrough, 2 points, set of 10

Linergy mounting track is designed to make the mounting of products in a panel easy. This 35 mm DIN3 mounting track is designed to accept most products that mount on 35 mm track. The track is prepunched with oblong slots to make mounting the track to the...

Linergy NEMA sectional terminal blocks are for terminating wires in a control panel and are designed to NEMA standards. This terminal block assembly has twelve 9080GR6 terminal blocks, a 9080GM6B end barrier and two 9080GH10 end clamps all mount on...

Linergy NEMA sectional terminal blocks are for terminating wires in a control panel and are designed to NEMA standards. This terminal block has a box lug connector for use with solid or stranded copper wires from #22 through #10 AWG. Each box lug...

Linergy NEMA sectional terminal blocks are for terminating wires in a control panel and are designed to NEMA standards. This terminal block has a box lug connector for use with solid or stranded copper wires from #22 through #8 AWG. Each box lug terminal...

Linergy NEMA sectional terminal blocks are for terminating wires in a control panel and are designed to NEMA standards. This terminal block has a box lug connector for use with solid or stranded copper wires from #22 through #10 AWG. Each box lug...

Linergy NEMA sectional terminal blocks are for terminating wire and are designed to NEMA standards. This end barrier is used to cover the open side of the 9080GM6 or 9080GR6 terminal block. An end barrier is required at the end of all assemblies of...

Linergy NEMA sectional terminal blocks are for terminating wire and are designed to NEMA standards. This end barrier is used to cover the open side of the 9080GM6 or 9080GR6 terminal block. An end barrier is required at the end of all assemblies of...

Linergy NEMA sectional terminal blocks are for terminating wire and are designed to NEMA standards. This end barrier is used to cover the open side of the 9080GF6 sectional fuse holder, 9080GG6 circuit isolation block, or 9080GS6 slip on connector block...

Linergy mounting track is designed to make the mounting of products in a panel easy. This 35 mm DIN3 mounting track is designed to accept most products that mount on 35 mm track. The track is prepunched with oblong slots to make mounting the track to the...

Linergy NEMA sectional terminal blocks are for terminating wire and are designed to NEMA standards. This end barrier is used to cover the open side of the 9080GA6 or 9080GP6 terminal block. An end barrier is required at the end of all assemblies of...

Linergy NEMA sectional terminal blocks are for terminating wires in a control panel and are designed to NEMA standards. This terminal block has a box lug connector for use with solid or stranded copper wires from #22 through #10 AWG. Each box lug...

Linergy mounting track is designed to make the mounting of products in a panel easy. This 35 mm DIN3 mounting track is designed to accept most products that mount on 35 mm track. The track does not have any prepunched mounting holes. This mounting track...