Industrial

Surgelogic™ Type EMA systems are external surgical protection devices with a focus on individual phase modules. With a surge current rating of 320,000 Amps, enhanced EMI/RFI filtering of -54 dB at 100 kHz is possible to increase performance at...

Surgelogic™ Type EMA Series surge protective devices deliver specification grade performance for service entrance or critical branch panel applications. These multi-phase surge suppression systems provide transient suppression, noise filtration in a...

Surgelogic™ Type MA_IMA systems are Type EMA replacement modules. With a surge current rating of 160,000 Amps and enhanced EMI/RFI filtering this SPD uses the service voltage configuration High Resistance Ground system. It has multi-stage suppression...

Surgelogic™ Type ICSE is designed to protect critical loads in buildings or industrial facilities. With surge protection for loads up to 15 Amps, Active Tracking Filter (ATF) technology offers high frequency noise filter capabilities. Ideal to protect...

Surgelogic™ Type XDSE systems are designed to provide highquality surge suppression for a wide variety of commercial, industrial or institutional applications. With a high-energy parallel design, this range is able to provide all modes of suppression at...

Surgelogic™ EMA and EBA series SPDs, MA4IMA16, offer a full range of externally mounted surge suppression solutions. These units are designed to provide surge suppression from service entrance panels to point-of-use equipment. US and Canadian UL® Listed...

Surgelogic™ Type EMA systems are external surgical protection devices with a focus on individual phase modules. With a surge current rating of 320,000 Amps, enhanced EMI/RFI filtering of -54 dB at 100 kHz is possible to increase performance at...

Surgelogic™ Type EMA systems are external surgical protection devices with a focus on individual phase modules. With a surge current rating of 480,000 Amps, enhanced EMI/RFI filtering of -54 dB at 100 kHz is possible to increase performance at...

Surge protection module, Surgelogic, MA, 160kA, 120/240 VAC, 3 phase, 4 wire, SPD type 2

Surgelogic™ Type MA_IMA systems are Type EMA replacement modules. With a surge current rating of 120,000 Amps and enhanced EMI/RFI filtering this SPD uses the service voltage configuration Delta system. It has multi-stage suppression circuits consisting...

Surgelogic™ Type EMA Series surge protective devices deliver specification grade performance for service entrance or critical branch panel applications. These multi-phase surge suppression systems provide transient suppression, noise filtration in a...

Surgelogic™ Type IESE with Active Tracking Filter technology offers high frequency noise filter capabilities with a 6,500 Amp surge current capacity per mode. With surge protection for loads up to 15 Amps, the suppresion of transient and high frequency...

Surgelogic™ Type IESE with Active Tracking Filter (ATF) technology offers high frequency noise filter capabilities with surge protection. Designed to protect any microprocessor based products, including industrial PLCs, OEM applications, and motion...

Surgelogic™ Type IESE with Active Tracking Filter (ATF) technology offers high frequency noise filter capabilities with surge protection. Designed to protect any microprocessor based products, including industrial PLCs, OEM applications, and motion...

Square D™ load center surge protective devices, SDSA2040, are easy to install plug-in units that install as quickly as a standard circuit breaker. The surge suppressors use two pole spaces in a QO™ or Homeline™ load center, or NQ panelboard. US and...

Surgelogic™ EMA and EBA series SPDs, MA5IMA16, offer a full range of externally mounted surge suppression solutions. These units are designed to provide surge suppression from service entrance panels to point-of-use equipment. US and Canadian UL® Listed...

Surgelogic™ Type EMA systems are external surgical protection devices with a focus on individual phase modules. With a surge current rating of 320,000 Amps, enhanced EMI/RFI filtering of -54 dB at 100 kHz is possible to increase performance at...

Surgelogic™ Type EMA systems are external surgical protection devices with a focus on individual phase modules. With a surge current rating of 240,000 Amps, enhanced EMI/RFI filtering of -54 dB at 100 kHz is possible to increase performance at...

Surgelogic™ Type EMA Series surge protective devices deliver specification grade performance for service entrance or critical branch panel applications. These multi-phase surge suppression systems provide transient suppression, noise filtration in a...

Surgelogic™ Type EMA Series surge protective devices deliver specification grade performance for service entrance or critical branch panel applications. These multi-phase surge suppression systems provide transient suppression, noise filtration, enhanced...