Wago

WAGO 750-606/040-000

SKU:

750-606/040-000

UPC:

MPN:

750-606/040-000

Condition:

New

color:

Dark gray

conformity marking:

CE

connection technology field supply:

2 x CAGE CLAMP

connection type 1:

Field supply

country of origin sales organisation germany:

DE

current carrying capacity power jumper contacts:

0.0416666666666667

data width:

2 bits (input voltage failure, fuse triggered)

depth:

70.9 mm / 2.791 inch

depth from upper edge of din rail:

63.7 mm / 2.508 inch

derating:

Derating (supply voltage): Surrounding air temperatures under laboratory conditions: (-25 +30 %): for -40 +55 C: 24 V (-25 +20 %): for +55 +70 C: 24 V (-25 +10 %): Lower limit in all temperature ranges: 27.5 % (

emc emission of interference:

Per EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3

emc immunity to interference:

Per EN 61000-6-1, -2, EN 61131-2, marine applications, EN 60255-26, EN 60870-2-1, EN 61850-3, IEC 61000-6-5, IEEE 1613, VDEW: 1994

ex guideline:

EN/IEC 60079-0, -7, -11

exposure to pollutants:

Per IEC 60068-2-42 and IEC 60068-2-43

fine stranded conductor:

0.25 1.5 mm / 24 14 AWG

fire load:

0.513 MJ

fuse:

Electronic

height:

100 mm / 3.937 inch

housing material:

Polycarbonate: polyamide 6.6

intrinsic safety ex i:

Yes

marking:

ATEX/IECEx: II 3G Ex ec IIC T4 Gc

mounting position:

Horizontal (standing/lying): vertical

mounting type:

DIN-35 rail

note:

General information (e.g., installation regulations) on explosion protection is available in the WAGO I/O System 750 XTR manuals!

number of outgoing power jumper contacts:

2

operating altitude:

Without temperature derating: 0 2000 m: with temperature derating: 2000 5000 m (0.5 K/100 m): 5000 m (max.)

packaging type:

Box

permissible h2s contaminant concentration at a relative humidity 75:

10 ppm

permissible so2 contaminant concentration at a relative humidity 75:

25 ppm

pollution degree 5:

2 per IEC 61131-2

power consumption 5 v system supply:

7.5 mA

power consumption pmax:

29 W

power loss pl:

< 5 W

power supply input:

Un = 24 VDC: Pmax. = 29 W: Um = 253 V

power supply output:

Uo = 26.8 V (intrinsically safe output voltage per protection level ia): In = 1 A

protection type:

IP20

rated surge voltage:

1 kV: Rated surge voltage between intrinsically safe and non-intrinsically safe circuits: 1.5 kV (EN 60079-11)

relative humidity with condensation:

Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E-DIN 40046-721-3 (except for wind-driven precipitation, water and ice formation)

relative humidity without condensation:

0.95

shock resistance:

Per IEC 60068-2-27 (15g/11 ms/half-sine/1,000 shocks: 25g/6 ms/1,000 shocks), EN 61373

solid conductor:

0.25 1.5 mm / 24 14 AWG

strip length:

5 6 mm / 0.2 0.24 inch

supply voltage field:

24 VDC (-25 +30 %): via power jumper contacts (power supply via CAGE CLAMP connection: transmission via spring contact): Derating must be observed!

supply voltage system:

5 VDC: via data contacts

surrounding air temperature operation:

-40 70 C

surrounding air temperature storage:

-40 85 C

vibration resistance:

Per IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3

weight:

168.300 g

width:

48 mm / 1.89 inch