Description
4-conductor center terminal block; required between end plate and end terminal block for terminal strips with fixing flanges
View AllClose
Electrical Data
- Rated voltage (III / 3): 800 V
- Rated impulse voltage (III / 3): 8 kV
- Rated current: 24 A
- Legend (ratings): (III / 3) Overvoltage category III / Pollution degree 3
Connection Data
- Connection technology: CAGE CLAMP<sup></sup>
- Actuation type: Operating tool
- Connectable conductor materials: Copper
- Solid conductor: 0.08 2.5 mm / 28 12 AWG
- Fine-stranded conductor: 0.08 2.5 mm / 28 12 AWG
- Strip length: 8 9 mm / 0.31 0.35 inch
- Total number of connection points: 4
- Total number of potentials: 1
- Number of levels: 1
- Type of wiring: Front-entry wiring
- Note (conductor cross-section): 12 AWG: THHN, THWN
Geometrical Data
- Width: 10 mm / 0.394 inch
- Height from the surface: 22.1 mm / 0.87 inch
- Depth: 32 mm / 1.26 inch
Mechanical Data
- Design: horizontal
- Mounting type: Mounting flange
- Marking level: Center marking
Material Data
- Color: gray
- Fire load: 0.114 MJ
- Weight: 6.412 g
Commercial data
- Packaging type: BOX
- Country of origin: CH
- GTIN: 4044918414746
- Customs Tariff No.: 85369010000
The WAGO 264 series feed-through center terminal block is a gray, single-deck component with a center marking slot, designed for one feed-through pole and accommodating four wires using two clamps on each side. It supports wire sizes from 0.08mm² to 2.5mm² or #28AWG to #12AWG, and is rated for a current of 24A. The terminal block features CAGE CLAMP spring connections and is equivalent to model 264351.
