Schneider Electric STBDDO3230K 24Vdc Out 2Pt 2.0A Kit
SKU:
STBDDO3230K
UPC:
3595863989304
MPN:
Condition:
New
Net Weight:
0.116 kg
Maximum Load Inductance:
500 mH 4 Hz
Product Certifications:
FM Class 1 Division 2 || CSA || UL
Response Time:
520 µs off-to-on || 720 µs on-to-off
Maximum Load Capacitance:
50 µF
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Hot Swapping Fallback:
yes for standard NIMs
Product Or Component Type:
standard digital output kit
Current Consumption:
45 mA 5 V DC logic bus
Absolute Maximum Voltage:
56 V 1.3 ms
Ambient Air Temperature For Storage:
-40-85 °C without derating
Vibration Resistance:
3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail || +/-0.35 mm 10-58 Hz
Width:
128.3 mm
Supply:
power distribution module
Pollution Degree:
2 IEC 60664-1
Rohs Exemption Information:
Yes
Mercury Free:
Yes
Standards:
IEC 61131-2
Product Compatibility:
power distribution module STBPDT3100/3105 || I/O base STBXBA1000
Protection Type:
power protection 1 external fuse per output time lag 2.5 A || reverse polarity protection || short-circuit protection || thermal overload protection
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Discrete Output Type:
solid state
Cold Swapping:
yes
Discrete Output Number:
2
Ambient Air Temperature For Storage:
-40...185 °F without derating
Minimum Load:
2 mA
Output Voltage:
19.2...30 V DC
Reset:
manual or automatic reset COM fault
Shock Resistance:
30 gn 11 ms IEC 88 reference 2-27
Status Led:
1 LED (Green) module status (RDY) || 1 LED per channel (Green) channel status (OUT1 to OUT2) || 1 LED (Red) module error (ERR)
Discrete Output Current:
2000 mA
Ambient Air Temperature For Operation:
0-60 °C without derating)
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Discrete Output Voltage Type:
DC
Insulation Between Channels And Logic Bus:
1500 V for 1 minute
Depth:
70 mm
Kit Composition:
STBXBA1000 base || STBXTS2100, 6-terminal spring clamp connector || STBXTS1100, 6-terminal screw type connector || STBDDO3230 module
China Rohs Regulation:
X
Ambient Air Temperature For Operation:
32...140 °F without derating
Discrete Output Logic:
positive or negative
Height:
13.9 mm
Fallback Status:
state 0 basic NIMs || user configurable standard NIMs
[Us] Rated Supply Voltage:
24 V DC
Range Of Product:
Modicon STB distributed I/O solution
Insulation Between Channels:
1500 V for 1 minute
Surge Current:
10 A 0.5 ms
Ip Degree Of Protection:
IP20 conforming to IEC 61131-2 class 1
Operating Altitude:
<= 6561.68 ft (2000 m)
Warranty:
18 months
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard discrete output kit has 2 discrete outputs, 2 normally open/normally contacts with solid state relay...
