41-41 A EN/IEC 60947-7-1 || 50-50 A cURus || 50-50 A CSA || 40-40 A ATEX Exe II Ex II 2 GD
Device Short Name:
TRV
Color:
Blue
Wire Stripping Length:
10 mm
Dielectric Loss:
0.01 at 1 MHz IEC 60250 || 0.01 at 1 MHz VDE 0303-T4
Cable Cross Section:
0.2-10 mm², solid with cable end || 0.2-6 mm², flexible with cable end || 0.2-10 mm², solid without cable end || 0.2-10 mm², flexible without cable end
Product out of China RoHS scope. Substance declaration for your information.
Mounting Mode:
clip-on
Product Or Component Type:
terminal block
Connections - Terminals:
1 x screw terminal upstream M4) || 1 x screw terminal downstream M4)
Flame Retardance:
V0 0.8 mm UL 94
Accessory / Separate Part Category:
connection accessory
Warranty:
18 months
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Circularity Profile:
N/A
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
[Ue] Rated Operational Voltage:
1000 V EN/IEC 60947-7-1 || 600 V CSA || 690 V ATEX Exe II Ex II 2 GD || 600 V cURus
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Dielectric Strength:
1000 V IEC 60243-1
Surface Resistance:
1000 G⦠IEC 60093 || 1000 G⦠VDE 0303-T30
Connection Position:
sideways
Tightening Torque:
1.5-1.8 N.m
Range Compatibility:
Prisma G || Prisma P || Prisma PH || Prisma Pack || Spacial || Kaedra || Pragma || TeSys
Linergy TR is terminal block for Linergy. It belongs to linergy passthrough terminal block with 10 mm² nominal cross section. The rated operational voltage is 600V conforming to CSA/cURus, 1000V...
Linergy TR is terminal block for Linergy. It belongs to linergy passthrough terminal block with 35 mm² nominal cross section. The rated operational voltage is 600V conforming to CSA/cURus, 1000V...
Linergy TR is terminal block for Linergy. It belongs to linergy passthrough terminal block with 35 mm² nominal cross section. The rated operational voltage is 600V conforming to CSA/cURus, 1000V...
Linergy terminal blocks offer three terminal block technologies. The traditional screw connection, the spring clamp connection, and the new pushin connection. The industrial control, machine tool,...
Linergy TR is terminal block for Linergy. It belongs to linergy passthrough terminal block with 16 mm² nominal cross section. The rated operational voltage is 600V conforming to CSA/cURus, 1000V...
Linergy TR is terminal block for Linergy. It belongs to linergy passthrough terminal block with 6 mm² nominal cross section. The rated operational voltage is 600V conforming to CSA/cURus, 1000V...