Schneider Electric LXM28AUA5M3X Lexium28 Can Io Drive 1/3Ph 230V 50W
SKU:
LXM28AUA5M3X
UPC:
3606480711756
MPN:
Condition:
New
Connector Type:
RJ45 CN4)CANopen, CANmotion
Protection Type:
against reverse polarity inputs signal || against short-circuits outputs signal || overcurrent motor || overvoltage motor || undervoltage motor || overheating motor || overload motor || overspeed motor
Marking:
CE || CSA || cULus
Safety Function:
STO (safe torque off), Integrated
Signalling Function:
servo status and fault codes five 7-segment display units
Electromagnetic Compatibility:
conducted emission - test level: level 3 category C3 conforming to IEC 61800-3
Depth:
146 mm
China Rohs Regulation:
X
Ambient Air Temperature For Storage:
-25-65 °C
Discrete Input Logic:
positive or negative CN1)
Range Of Product:
Lexium 28
Output Current 3S Peak 2:
2 A 220 V
[Us] Rated Supply Voltage:
200...240 V - 10...15 %)three phase || 200...240 V - 20...15 %)single phase
Discrete Input Number:
8 programmable CN1) || 1 pulse train input (PTI) CN1) || 2 fast capture CN1) || 1 safety function STO CN9)
Nominal Power:
0.05 kW 220 V 16 kHz
Sustainable Offer Status:
Green Premium product
Control Signal Type:
servo motor encoder feedback CN2
Ambient Air Temperature For Operation:
0-55 °C
Transmission Rate:
250 kbit/s 100-250 m CANopen, CANmotion || 500 kbit/s 4-100 m CANopen, CANmotion || 1 Mbit/s 4-4 m CANopen, CANmotion
Vibration Resistance:
3M4 3 mm 9-200 Hz)IEC 60721-3-3
Rohs Exemption Information:
Yes
Ip Degree Of Protection:
IP20
Maximum Leakage Current:
1.3 mA
Line Current:
0.8 A 262.8 % 220 V, single phase || 0.8 A 227 % 220 V, three phase
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...6561.68 ft (> 1000...2000 m) 1 % per 100 m
Operating Position:
vertical
Shock Resistance:
10 gn, type I IEC 60721-3-3
Overvoltage Category:
III
Product Certifications:
CSA || CE || cULus
Analogue Input Type:
V_REF voltage analog input - 10...10 V 10 kOhm 14 bits || T_REF voltage analog input
Electrical Connection:
spring terminal 0.82...1 mm², AWG 18 L1-L2) || spring terminal 0.82...1 mm², AWG 18 R, S, T) || spring terminal 0.82...1 mm², AWG 18 U, V, W, PE) || spring terminal 0.82...1 mm², AWG 18 PA/+, PBe)
Pvc Free:
Yes
Circularity Profile:
ENVEOLI1409001EN
Format Of The Drive:
compact housing
Phase:
single phase || three phase
Electrical Isolation:
between power and control
Analogue Input Number:
2
Discrete Output Voltage:
12...24 V DC
Network Frequency:
47.5...63 Hz
Type Of Cable:
shielded motor cable 0-55 °C) copper
Supply Voltage Limits:
200-255 V three phase || 170-255 V single phase
Supply Frequency:
50/60 Hz - 5...5 %
Physical Interface:
RS485 Modbus Serial line slave
Discrete Output Number:
5 logic output CN1)12...24 V DC || 1 pulse train output (PTO) CN1)
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Emc Filter:
without EMC filter
Continuous Output Current:
0.64 A 16 kHz
Product Compatibility:
servo motor BCH2 40 mm, 1 50 W
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Continuous Power:
50 W 220 V
Discrete Input Voltage:
24 V DC logic
Communication Interface:
CANopen, Integrated || CANmotion, Integrated
Absolute Accuracy Error:
0.001
Width:
55 mm
Output Voltage:
<= power supply voltage
Safety Level:
SIL 2 IEC 61800-5-2 2007 || SIL 2 IEC 61508-1 2010 || PL d/category 3 ISO 13849-1 2008 || SIL 2 ISO 13849-1 2009/AC || SIL 2 IEC 60204-1 2006 || SIL 2 IEC 60204-1 2009/A1 || SIL 2 IEC 60204-1 2010/AC || SIL 2 IEC 62061 2012
Method Of Access:
slave
Output Current 3S Peak:
2 A 220 V
Number Of Addresses:
1-127 CANopen, CANmotion
Relative Humidity:
5-95 % without condensation
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Net Weight:
1 kg
Product Or Component Type:
motion servo drive
Output Current 3S Peak 3:
2 A 220 V
Device Short Name:
LXM28A
Status Led:
1 LED (Red) charge || 1 LED (Green) RUN || 1 LED (Red) error
Reach Free Of Svhc:
Yes
Mercury Free:
Yes
Environmental Disclosure:
ENVPEP1409001EN
Height:
150 mm
Type Of Cooling:
natural convection
Standards:
IEC 61800-5-1
Discrete Output Logic:
positive or negative CN1)
Switching Frequency:
16 kHz
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated CANopen, CAN motion interface 7-segment display with...
This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The motion servo drive without EMC filter, features a HMI interface 7-segment display...
This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The motion servo drive without EMC filter, features a HMI interface 7-segment display...
This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated CANopen, CAN motion interface 7-segment display with...
This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated CANopen, CAN motion interface 7-segment display with...
This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated CANopen, CAN motion interface 7-segment display with...
This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The motion servo drive without EMC filter, features a HMI interface 7-segment display...
This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated CANopen, CAN motion interface 7-segment display with...