Schneider Electric LXM28AU45M3X Lexium28 Can Io Drive 3Ph 230V 4,5Kw
SKU:
LXM28AU45M3X
UPC:
3606480711848
MPN:
Condition:
New
Discrete Input Logic:
positive or negative CN1)
Network Frequency:
47.5...63 Hz
Format Of The Drive:
compact housing
Product Certifications:
cULus || CSA || CE
Output Current 3S Peak 2:
61 A 220 V
Continuous Output Current:
22.9 A 8 kHz
Reach Free Of Svhc:
Yes
Overvoltage Category:
III
Mercury Free:
Yes
Continuous Power:
4500 W 220 V
Standards:
IEC 61800-5-1
Status Led:
1 LED (Red) charge || 1 LED (Green) RUN || 1 LED (Red) error
Operating Position:
vertical
Maximum Leakage Current:
1.55 mA
Ambient Air Temperature For Operation:
0-55 °C
Connector Type:
RJ45 CN4)CANopen, CANmotion
Circularity Profile:
ENVEOLI1409001EN
Electrical Isolation:
between power and control
Depth:
186 mm
Physical Interface:
RS485 Modbus Serial line slave
Line Current:
17.9 A 147.1 % 220 V, three phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Output Current 3S Peak 3:
61 A 220 V
Operating Altitude:
<= 3280.84 ft (1000 m) without derating || > 3280.84...6561.68 ft (> 1000...2000 m) 1 % per 100 m
Height:
234 mm
Ambient Air Temperature For Storage:
-25-65 °C
Discrete Input Voltage:
24 V DC logic
China Rohs Regulation:
X
Rohs Exemption Information:
Yes
Vibration Resistance:
3M4 3 mm 9-200 Hz)IEC 60721-3-3
Supply Voltage Limits:
200-255 V three phase
Product Or Component Type:
motion servo drive
Switching Frequency:
8 kHz
Discrete Output Voltage:
12...24 V DC
Signalling Function:
servo status and fault codes five 7-segment display units
Device Short Name:
LXM28A
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Emc Filter:
without EMC filter
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Pvc Free:
Yes
Output Voltage:
<= power supply voltage
Discrete Input Number:
8 programmable CN1) || 1 pulse train input (PTI) CN1) || 2 fast capture CN1) || 1 safety function STO CN9)
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Phase:
three phase
Type Of Cable:
shielded motor cable 0-55 °C) copper
Analogue Input Type:
V_REF voltage analog input - 10...10 V 10 kOhm 14 bits || T_REF voltage analog input
Electromagnetic Compatibility:
conducted emission - test level: level 3 category C3 conforming to IEC 61800-3
Safety Level:
SIL 2 IEC 61800-5-2 2007 || SIL 2 IEC 61508-1 2010 || PL d/category 3 ISO 13849-1 2008 || SIL 2 ISO 13849-1 2009/AC || SIL 2 IEC 60204-1 2006 || SIL 2 IEC 60204-1 2009/A1 || SIL 2 IEC 60204-1 2010/AC || SIL 2 IEC 62061 2012
Sustainable Offer Status:
Green Premium product
Communication Interface:
CANopen, Integrated || CANmotion, Integrated
[Us] Rated Supply Voltage:
200...240 V - 10...15 %)three phase
Absolute Accuracy Error:
0.001
Product Compatibility:
servo motor BCH2 180 mm, 3 4500 W || servo motor BCH2 180 mm, 2 3500 W
Marking:
cULus || CSA || CE
Safety Function:
STO (safe torque off), Integrated
Method Of Access:
slave
Discrete Output Number:
5 logic output CN1)12...24 V DC || 1 pulse train output (PTO) CN1)
Width:
116 mm
Nominal Power:
4.5 kW 220 V 8 kHz
Discrete Output Logic:
positive or negative CN1)
Range Of Product:
Lexium 28
Protection Type:
against reverse polarity inputs signal || against short-circuits outputs signal || overcurrent motor || overvoltage motor || undervoltage motor || overheating motor || overload motor || overspeed motor
Number Of Addresses:
1-127 CANopen, CANmotion
Net Weight:
3.2 kg
Analogue Input Number:
2
Supply Frequency:
50/60 Hz - 5...5 %
Relative Humidity:
5-95 % without condensation
Electrical Connection:
spring terminal 6 mm², AWG 10 L1-L2) || spring terminal 6 mm², AWG 10 R, S, T) || spring terminal 6 mm², AWG 10 U, V, W, PE) || spring terminal 6 mm², AWG 10 PA/+, PBe)
Ip Degree Of Protection:
IP20
Control Signal Type:
servo motor encoder feedback CN2
Transmission Rate:
250 kbit/s 100-250 m CANopen, CANmotion || 500 kbit/s 4-100 m CANopen, CANmotion || 1 Mbit/s 4-4 m CANopen, CANmotion
This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated CANopen, CAN motion interface 7-segment display with...
This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated CANopen, CAN motion interface 7-segment display with...
This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated CANopen, CAN motion interface 7-segment display with...
This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The motion servo drive without EMC filter, features a HMI interface 7-segment display...
This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The motion servo drive without EMC filter, features a HMI interface 7-segment display...
This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated CANopen, CAN motion interface 7-segment display with...
This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated CANopen, CAN motion interface 7-segment display with...
This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The motion servo drive without EMC filter, features a HMI interface 7-segment display...