Schneider Electric HMIZMDARX Multidisplay Adaptor For Gtu
SKU:
HMIZMDARX
UPC:
3606480778711
MPN:
Condition:
New
Output Current:
50 mA
Accessory / Separate Part Type:
adaptor
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Input Voltage:
12 V DC module supply || 24 V DC
Mercury Free:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Compatibility:
Harmony GTU open || Harmony iPC industrial PCs
Accessory / Separate Part Category:
adaptation accessory
Rohs Exemption Information:
Yes
Net Weight:
0.8 kg
[Us] Rated Supply Voltage:
12 V DC module supply
Reach Free Of Svhc:
Yes
Ambient Air Temperature For Operation:
0-60 °C
Electromagnetic Compatibility:
electrostatic discharge immunity test - test level: 6 kV level 3 (contact discharge) conforming to IEC 61000-4-2 || electrostatic discharge immunity test - test level: 8 kV level 3 (air discharge) conforming to IEC 61000-4-2
China Rohs Regulation:
X
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Output Voltage Type:
DC
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Relative Humidity:
10-90 % non-condensing
Accessory / Separate Part Destination:
Harmony GTU display
Type Of Cooling:
natural
Output Voltage:
24 V
Ambient Air Temperature For Storage:
-20-60 °C
Operating Altitude:
6561.68 ft (2000 m)
Power Consumption In W:
8 W
Shock Resistance:
147 m/s²X, Y, Z directions for 3 times EN/IEC 61131-2
Pollution Degree:
2
Vibration Resistance:
3.5 mm constant amplitude 5-9 Hz) X, Y, Z directions for 10 cycles (approx. 100 min) EN/IEC 61131-2 || 9.8 m/s² constant acceleration 9-150 Hz) X, Y, Z directions for 10 cycles (approx. 100 min) EN/IEC 61131-2
Width:
188 mm
Product Certifications:
UL 508 || CSA C22-2 No 142 || CSA C22-2 No 213 || cULus HazLoc Class I Division 2 ANSI/ISA 12-12-01 || IEC-Ex || ATEX zone 2/22 || EAC || UKCA || UKEX
Environmental Characteristic:
corrosive gas free || dustproof
Local Signalling:
LED green, steady operating status (RUN) || LED green, faded stand-by || LED green/orange, alternate program mode || LED orange, flashing establishing communication connection || LED red, steady power ON || LED green, orange and red, alternate ERROR
Resistance To Fast Transients:
1 kV IEC 61000-4-4 signal ports) || 2 kV IEC 61000-4-4 power ports)
Height:
131 mm
Depth:
35 mm
Integrated Connection Type:
1 DIO terminal block 3 inputs + 1 output || 2 Ethernet TCP/IP RJ45 jack
This Harmony XACB961 is an adaptor for self-supporting cable with protective cable sleeve 10mm to 22mm. It is part of the range Harmony XAC pendant control stations for diameter 22mm plastic...
This Schneider Electric Harmony K adaptor plate is designed to be used with 22mm Cam Switch/Selector Switch. This adaptor plate is designed to meet most industrial and process control application...
XB4/ZB4 and XB5/ZB5 22mm push buttons are for industrial applications. This adaptor is used to mount 22mm operators into a 30mm hole. Adaptors are bulk packaged in quantities of 10. "It weighs 0...
This mechanical device consists in an adapter for mounting the control module at 90°. This is used to mount the power module on the side of the drive, keeping the control module visible and...
TeSys GV products provide efficient motor control and protection solutions up to 520 amps. This 7.5 mm compensation plate allows the mounting of GV2M and GV2P on a common bus bar. This plate is 1.54...