Schneider Electric

Schneider Electric BMI0703P36A Mot 3P 70Mm Ip65 860W Key Enc Sgt 16

SKU:

BMI0703P36A

UPC:

3606485376561

MPN:

Condition:

New

Product Compatibility:

drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT

[Us] Rated Supply Voltage:

208...480 V - 15...10 %

Shaft End:

keyed

Mounting Support:

international standard flange

Continuous Stall Current:

0.0833333333333333

Product Or Component Type:

servo motor with power stage

Length:

300 mm

Nominal Speed:

3300 rpm 400 V three phase || 1600 rpm 208 V three phase || 3900 rpm 480 V three phase

Maximum Axial Force Fa:

0.2 x Fr

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Distance Shaft Shoulder-Flange:

2.5 mm

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Number Of Motor Poles:

10

Number Of Motor Stacks:

3

Circle Diameter Of The Mounting Holes:

75-82 mm

Key Width:

5 mm

Device Short Name:

BMI

Environmental Disclosure:

ENVPEP1312017EN

Motor Flange Size:

70 mm

Maximum Mechanical Speed:

8000 rpm

Centring Collar Depth:

2.5 mm

China Rohs Regulation:

X

Warranty:

18 months

Centring Collar Diameter:

60 mm

Maximum Current Irms:

12.5 A 400 V, three phase || 12.5 A 480 V, three phase || 12.5 A 208 V, three phase

Supply Frequency:

50/60 Hz - 5...5 %

Network Frequency Limits:

47.5-63 Hz

Continuous Stall Torque:

3.4 N.m 208...480 V three phase

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Number Of Mounting Holes:

4

Back Emf Constant:

95.39 V/krpm 20 °C

Speed Feedback Resolution:

32768 points/turn

Stator Resistance:

7.99 Ohm 20 °C

Shaft Diameter:

14 mm

Phase:

three phase

Mounting Holes Diameter:

5.5 mm

Range Compatibility:

Lexium 32i

Pvc Free:

Yes

Torque Constant:

1.41 N.m/A 20 °C

Rotor Inertia:

1.67 kg.cm²

Continuous Output Current:

2 A 8 kHz

Peak Stall Torque:

8.6 N.m 208 V three phase || 8.6 N.m 400 V three phase || 8.6 N.m 480 V three phase

Output Current 3S Peak:

6 A 400 V 3 s

Sustainable Offer Status:

Green Premium product

Circularity Profile:

ENVEOLI1312017EN

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Ip Degree Of Protection:

IP65

Mercury Free:

Yes

Type Of Cooling:

natural convection

Shaft Length:

30 mm

Emc Filter:

integrated

Second Shaft:

without second shaft end

Electrical Connection:

printed circuit board connector

Stator Inductance:

25.6 mH 20 °C

Supply Voltage Limits:

208-480 V

Rohs Exemption Information:

Yes

Holding Brake:

without

Nominal Torque:

2.9 N.m 208 V three phase || 2.7 N.m 400 V three phase || 2.3 N.m 480 V three phase

Maximum Radial Force Fr:

730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm

Nominal Output Power:

900 W 400 V three phase || 900 W 480 V three phase || 450 W 208 V three phase

Stator Electrical Time Constant:

3.2 ms 20 °C

Feedback Type:

absolute single turn SinCos Hiperface

Datasheet:

View