Schneider Electric

Schneider Electric BMI0702P26A Mot 3P 70Mm Ip65 790W Nky Enc Sgt 16

SKU:

BMI0702P26A

UPC:

3606485375847

MPN:

Condition:

New

Device Short Name:

BMI

Motor Flange Size:

70 mm

Nominal Torque:

2.4 N.m 208 V three phase || 2.2 N.m 400 V three phase || 2 N.m 480 V three phase

Nominal Speed:

1800 rpm 208 V three phase || 3600 rpm 400 V three phase || 4400 rpm 480 V three phase

Circularity Profile:

ENVEOLI1312017EN

Second Shaft:

without second shaft end

Stator Inductance:

25.75 mH 20 °C

Product Compatibility:

drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT

Sustainable Offer Status:

Green Premium product

Feedback Type:

absolute single turn SinCos Hiperface

Centring Collar Diameter:

60 mm

Mounting Holes Diameter:

5.5 mm

Warranty:

18 months

Continuous Stall Current:

0.0833333333333333

Circle Diameter Of The Mounting Holes:

75-82 mm

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Mercury Free:

Yes

Type Of Cooling:

natural convection

Maximum Axial Force Fa:

0.2 x Fr

Shaft End:

untapped

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Centring Collar Depth:

2.5 mm

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Torque Constant:

1.15 N.m/A 20 °C

Environmental Disclosure:

ENVPEP1312017EN

Speed Feedback Resolution:

32768 points/turn

Shaft Length:

23 mm

Shaft Diameter:

11 mm

Maximum Mechanical Speed:

8000 rpm

Stator Resistance:

8.89 Ohm 20 °C

Mounting Support:

international standard flange

Number Of Mounting Holes:

4

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Ip Degree Of Protection:

IP65

Continuous Stall Torque:

2.48 N.m 208...480 V three phase

Number Of Motor Poles:

10

Rohs Exemption Information:

Yes

Rotor Inertia:

1.13 kg.cm²

Holding Brake:

without

Pvc Free:

Yes

Product Or Component Type:

servo motor with power stage

Nominal Output Power:

400 W 208 V three phase || 800 W 400 V three phase || 900 W 480 V three phase

Emc Filter:

integrated

Maximum Current Irms:

9.6 A 208 V, three phase || 9.6 A 400 V, three phase || 9.6 A 480 V, three phase

Maximum Radial Force Fr:

710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm

Electrical Connection:

printed circuit board connector

Range Compatibility:

Lexium 32i

Length:

268 mm

Peak Stall Torque:

6.8 N.m 208 V three phase || 6.8 N.m 400 V three phase || 6.8 N.m 480 V three phase

Stator Electrical Time Constant:

2.9 ms 20 °C

[Us] Rated Supply Voltage:

208...480 V - 15...10 %

Back Emf Constant:

77.18 V/krpm 20 °C

Output Current 3S Peak:

6 A 400 V 3 s

Supply Voltage Limits:

208-480 V

Number Of Motor Stacks:

2

Phase:

three phase

Supply Frequency:

50/60 Hz - 5...5 %

China Rohs Regulation:

X

Continuous Output Current:

2 A 8 kHz

Distance Shaft Shoulder-Flange:

2.5 mm

Network Frequency Limits:

47.5-63 Hz

Datasheet:

View