Schneider Electric

Schneider Electric ATV950D30N4U Atv950 Ip55 Ultype12 30Kw 400V/480V Vari

SKU:

ATV950D30N4U

UPC:

3606481284327

MPN:

Condition:

New

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Vibration Resistance:

1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6 || 1 gn 13-200 Hz)IEC 60068-2-6

Option Card:

slot A communication module Profibus DP V1 || slot A communication module PROFINET || slot A communication module DeviceNet || slot A communication module EtherCAT || slot A communication module CANopen daisy chain RJ45 || slot A communication module

Quantity Per Set:

1

Maximum Thdi:

<48 % from 80...100 % of load IEC 61000-3-12

Motor Power Kw:

30.0 kW normal duty || 22.0 kW heavy duty

Analogue Output Type:

software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 500 Ohm 10 bits

[Us] Rated Supply Voltage:

380...480 V - 15...10 %

Ambient Air Transport Temperature:

-40-70 °C

Refresh Time:

relay output R1, R2, R3)5 ms +/- 0.5 ms)

Permitted Relative Humidity (During Operation):

class 3K5 according to EN 60721-3

Product Specific Application:

process for industrial

Product Destination:

synchronous motors || asynchronous motors

Product Or Component Type:

variable speed drive

Connector Type:

2 RJ45 || 1 RJ45

Product Certifications:

DNV-GL || TÜV || ABS || ATEX INERIS || CSA || UL || Bureau Veritas

Base Load Current At Low Overload:

61.5 A

Mounting Mode:

wall mount

Base Load Current At High Overload:

46.3 A

Asynchronous Motor Control Profile:

variable torque standard || constant torque standard || optimized torque mode

Operating Position:

vertical +/- 10 degree

With Safety Function Safely Limited Speed (Sls):

TRUE

With Safety Function Safe Torque Off (Sto):

TRUE

Accuracy:

+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input || +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output

With Safety Function Safe Speed Monitor (Ssm):

FALSE

With Safety Function Safe Stop 1 (Ss1):

TRUE

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Discrete Output Type:

logic output DQ+ 0-1 kHz <= 30 V DC 100 mA || programmable as pulse output DQ+ 0-30 kHz <= 30 V DC 20 mA || logic output DQ- 0-1 kHz <= 30 V DC 100 mA

Width:

290 mm

Exchange Mode:

half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Ambient Air Temperature For Storage:

-40-70 °C

Motor Slip Compensation:

automatic whatever the load || not available in permanent magnet motor law || can be suppressed || adjustable

Prospective Line Isc:

50 kA

Net Weight:

50 kg

Number Of Addresses:

1-247 Modbus serial

Discrete Output Number:

2

China Rohs Regulation:

X

With Safety Function Safe Position (Sp):

FALSE

Line Current:

53.3 A 380 V normal duty) || 40.5 A 380 V heavy duty) || 45.9 A 480 V normal duty) || 35.8 A 480 V heavy duty)

Apparent Power:

29.8 kVA 480 V heavy duty) || 38.2 kVA 480 V normal duty)

Insulation Resistance:

> 1 MOhm 500 V DC for 1 minute to earth

Maximum Deflection Under Vibratory Load (During Operation):

1.5 mm at 2...13 Hz

Maximum Acceleration Under Shock Impact (During Operation):

150 m/s² at 11 ms

Operating Altitude:

<= 3280.84 ft (1000 m) without derating || 1000...4800 m with current derating 1 % per 100 m

Ip Degree Of Protection:

IP55

Sampling Duration:

2 ms +/- 0.5 ms DI1...DI8) - discrete input || 5 ms +/- 1 ms DI7, DI8) - pulse input || 1 ms +/- 1 ms AI1, AI2, AI3) - analog input || 5 ms +/- 1 ms AQ1, AQ2) - analog output

Pollution Degree:

2

Relative Symmetric Network Frequency Tolerance:

0.05

Transmission Rate:

10, 100 Mbits || 4.8 kbps || 9600 bit/s || 19200 bit/s

With Sft Fct Safe Stop 2 (Ss2):

FALSE

Braking To Standstill:

by DC injection

Type Of Polarization:

no impedance

Transmission Rate:

10/100 Mbit/s Ethernet IP/Modbus TCP || 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial

Discrete Input Number:

10

Device Application:

Industrial Application

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Relay Output Number:

3

Rohs Exemption Information:

Yes

Height:

910 mm

Brake Chopper Integrated:

TRUE

Physical Interface:

Ethernet || 2-wire RS 485

Variant:

standard version || with braking chopper

Relative Humidity:

5-95 % without condensation IEC 60068-2-3

Range Of Product:

Altivar Process ATV900

Assembly Style:

enclosed

Relay Output Type:

configurable relay logic R1 fault relay NO/NC 100000 cycles || configurable relay logic R2 sequence relay NO 1000000 cycles || configurable relay logic R3 sequence relay NO 1000000 cycles

Communication Port Protocol:

EtherNet/IP || Modbus TCP || Modbus serial

Discrete Input Type:

DI1...DI8 programmable, 24 V DC <= 30 V)3.5 kOhm || DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V) || STOA, STOB safe torque off, 24 V DC <= 30 V)> 2.2 kOhm

With Safety Function Safely Limited Position (Slp):

FALSE

Emc Filter:

integrated || with EMC plate option

Input Compatibility:

DI1...DI8 discrete input level 1 PLC IEC 61131-2 || DI7, DI8 pulse input level 1 PLC IEC 65A-68 || STOA, STOB discrete input level 1 PLC IEC 61131-2

Nominal Switching Frequency:

4 kHz

Regulation Loop:

adjustable PID regulator

With Safety Function Safe Programmable Logic:

FALSE

Acceleration And Deceleration Ramps:

linear adjustable separately from 0.01...9999 s

Phase:

3 phase

Data Format:

8 bits, configurable odd, even or no parity

With Safety Function Safe Operating Stop (Sos):

FALSE

Environmental Characteristic:

chemical pollution resistance class 3C3 IEC 60721-3-3 || dust pollution resistance class 3S3 IEC 60721-3-3

Ambient Air Temperature For Operation:

-15-40 °C without derating) || 40-50 °C with derating factor)

Method Of Access:

slave Modbus TCP

Isolation:

between power and control terminals

Environmental Disclosure:

ENVPEP1506001EN

Analogue Input Number:

3

Number Of Addresses:

1-247

Electromagnetic Compatibility:

electrostatic discharge immunity test level 3 IEC 61000-4-2 || radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 || electrical fast transient/burst immunity test level 4 IEC 61000-4-4 || 1.2/50 µs - 8/20 µs surge im

Synchronous Motor Control Profile:

permanent magnet motor || synchronous reluctance motor

Maximum Switching Current:

relay output R1 resistive, cos phi = 1 3 A 250 V AC || relay output R1 resistive, cos phi = 1 3 A 30 V DC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 250 V AC || relay output R1 inductive, cos phi = 0.4 7 ms 2 A 30 V DC || relay output R2, R

Depth:

340 mm

Transmission Frame:

RTU

Environmental Class (During Operation):

class 3C3 according to IEC 60721-3-3 || class 3S3 according to IEC 60721-3-3

Data Format:

8 bits, configurable odd, even or no parity Modbus serial

Mercury Free:

Yes

Standards:

UL 508C || IEC 61800-3 || IEC 61800-5-1 || IEC 61000-3-12 || IEC 60721-3 || IEC 61508 || IEC 13849-1

With Safety Function Safe Brake Management (Sbc/Sbt):

TRUE

Upgradeability:

Upgraded components available

Local Signalling:

local diagnostic 3 LED mono/dual colour) || embedded communication status 5 LED dual colour) || communication module status 2 LED dual colour) || presence of voltage 1 LED red)

Minimum Switching Current:

relay output R1, R2, R3 5 mA 24 V DC

Linearity Error:

AI1, AI2, AI3 +/- 0.15 % of maximum value analog input || AQ1, AQ2 +/- 0.2 % analog output

Discrete Input Logic:

positive logic (source) DI1...DI8), < 5 V, > 11 V || negative logic (sink) DI1...DI8), > 16 V, < 10 V || positive logic (source) DI7, DI8), < 0.6 V, > 2.5 V || positive logic (source) STOA, STOB), < 5 V, > 11 V

Circularity Profile:

ENVEOLI1506001EN

Supply:

external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection || internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for d

Maximum Acceleration Under Vibrational Stress (During Operation):

10 m/s² at 13...200 Hz

Continuous Output Current:

61.5 A 4 kHz normal duty || 46.3 A 4 kHz heavy duty

Marking:

CE

Degree Of Protection:

UL type 12

Type Of Polarization:

no impedance Modbus serial

Protection Type:

thermal protection motor || safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-c

Shock Resistance:

15 gn 11 ms IEC 60068-2-27

Analogue Input Type:

AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits

4 Quadrant Operation Possible:

TRUE

Maximum Output Frequency:

599 Hz

Electrical Connection:

control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 || line side screw terminal 25...50 mm² AWG 4...AWG 1 || motor screw terminal 25...50 mm² AWG 4...AWG 1 || DC bus screw terminal 25...50 mm² AWG 4...AWG 1

Overvoltage Category:

III

Noise Level:

69.7 dB 86/188/EEC

Sustainable Offer Status:

Green Premium product

Analogue Output Number:

2

Network Frequency:

50-60 Hz

With Safety Function Safe Direction (Sdi):

FALSE

Discrete Input Logic:

16 preset speeds

Maximum Output Voltage:

480.0 V

Switching Frequency:

2...16 kHz adjustable || 4...16 kHz with derating factor

Maximum Transient Current:

73.8 A 60 s normal duty) || 69.5 A 60 s heavy duty)

Noise Level:

69.7 dB

Catalog:

View

Datasheet:

View