Baumer

Baumer UNDK 30P1713/S14 10118626

(No reviews yet) Write a Review
SKU:
10118626
MPN:
10118626
Condition:
New
Scanning range Sd:
30 … 250 mm
Scanning range far limit Sde:
30 … 250 mm
Hysteresis typ.:
4 % Sde
Repeat accuracy:
0.5 mm
Synchronization:
Yes
Multiplex version:
On request
Temperature drift:
< 0,18 % Sde/K
Response time ton (sync on):
< 10 ms
Release time toff (sync on):
< 10 ms
Sonic frequency:
300 kHz
Adjustment:
Potentiometer
Alignment aid:
Target indication flashing
Output indicator:
LED green
Voltage supply range +Vs:
12 … 30 VDC
Current consumption max. (no load):
35 mA
Output circuit:
PNP make function (NO)
Output current:
200 mA
Voltage drop Vd:
<2 VDC
Residual ripple:
< 10 % Vs
Short circuit protection:
Yes
Reverse polarity protection:
Yes
Design:
Rectangular
Housing material:
Polyester / die-cast zinc
Width / diameter:
30 mm
Height / length:
65 mm
Depth:
31 mm
Connection types:
Connector M12
Operating temperature:
-25 … +60 °C
Protection class:
IP 67
Datasheet:
View
$784.00

Description

The Baumer UNDK 30P1713/S14 10118626 is an ultrasonic sensor with a scanning range of 30 to 250 mm and a repeat accuracy of 0.5 mm. It features synchronization capabilities and offers a multiplex version upon request. The sensor has a temperature drift of less than 0.18% Sde/K and both response and release times under 10 ms. Operating at a sonic frequency of 300 kHz, it includes a potentiometer for adjustments and a target indication flashing for alignment aid. The output is indicated by a green LED and the sensor operates on a voltage supply range of 12 to 30 VDC with a maximum current consumption of 35 mA. It supports a PNP make function (NO) output circuit with an output current of 200 mA and a voltage drop of less than 2 VDC. The sensor is equipped with short circuit and reverse polarity protection, housed in a rectangular polyester/die-cast zinc body measuring 30 mm in width, 65 mm in height, and 31 mm in depth. It connects via an M12 connector and operates within a temperature range of -25 to +60 °C. The sensor is IP 67 rated, ensuring protection against dust and water ingress.
View AllClose