Baumer

Baumer OPDM 12P5101/S35A 10132220

(No reviews yet) Write a Review
SKU:
10132220
MPN:
10132220
Condition:
New
Type:
Retro-reflective laser sensor
Version:
Single lens optics
Light source:
Pulsed red laser diode
Actual range Sb:
7 m
Nominal range Sn:
8 m
Repeat accuracy:
0.1 mm at laser focus
Polarization filter:
Yes
Alignment / soiled lens indicator:
Flashing light indicator
Light indicator:
LED yellow
Power on indication:
LED green
Sensitivity adjustment:
No
Laser class:
2
Distance to focus:
400 mm
Wave length:
650 nm
Response time / release time:
< 0.1 ms
Voltage supply range +Vs:
10 … 30 VDC
Current consumption max. (no load):
50 mA
Current consumption typ.:
40 mA
Voltage drop Vd:
<1.8 VDC
Output function:
Light / dark operate
Output circuit:
PNP
Output current:
100 mA
Short circuit protection:
Yes
Reverse polarity protection:
Yes
Width / diameter:
12.4 mm
Height / length:
35 mm
Depth:
35 mm
Design:
Rectangular
Housing material:
Die-cast zinc
Front (optics):
Glass
Connection types:
Connector M8 4 pin
Operating temperature:
-10 … +50 °C
Protection class:
IP 67
Datasheet:
View
$844.00

Description

The Baumer OPDM 12P5101/S35A is a retro-reflective laser sensor featuring single lens optics and a pulsed red laser diode. It offers an actual range of 7 m and a nominal range of 8 m, with repeat accuracy of 0.1 mm at laser focus. Equipped with a polarization filter, this sensor includes a flashing light indicator for alignment or soiled lens detection, and LED indicators for power status and light operation. It does not require sensitivity adjustment. The sensor operates within a voltage supply range of 10 to 30 VDC, consuming a maximum of 50 mA with no load. It features a PNP output circuit with light/dark operate functionality, and includes short circuit and reverse polarity protection. The compact, rectangular design measures 12.4 mm in width, 35 mm in height and depth, and is made from die-cast zinc with a glass front. It connects via an M8 4-pin connector and operates in temperatures ranging from -10 to +50 °C. The sensor is rated IP 67 for protection against dust and water ingress.
View AllClose